IBM NetVista, Руководство по техническому обслуживанию аппаратной части

Страница: 68 / 155

68
Table 2-3 Error Symptoms List
Error Symptoms Action/FRU
NOTE:
To diagnose a problem, first find the error symptom in the left column. If directed to a check procedure, replace the
FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the
most likely cause.
Display problem:
- Incorrect colors
- No high intensity
- Missing, broken, or
incorrect characters
- Blank monitor(dark)
- Blank monitor(bright)
- Distorted image
- Unreadable monitor
- Other monitor problems
Monitor signal connection/cable.
Monitor
System board
Display changing colors. Monitor signal connection/cable
Monitor
System board
Display problem not listed above
(including blank or illegible
monitor).
"Monitor" on page 83.
Loads default settings (if screen is readable).
System board
Parallel
NOTE:
Execute “Load BIOS Default Settings” in BIOS Setup to confirm ports’ presence before diagnosing any
parallel/serial ports problems.
Serial or parallel port loop-back
test failed.
Make sure that the LPT# or COM# you test is the same as is set in BIOS Setup.
Loop-back.
System board.
Printing failed. Make sure that the printer driver is properly installed.
Refer to the service manual for the printer.
Printer.
Printer cable.
System board.
Printer problems. Refer to the service manual for the printer.
Joystick
Game port does not respond or
does not work.
Connect a joystick to the game port, and then execute “Interactive Test/Joystick test” in
PC-Doctor diagnostics program.
System board.
Diagnostic Program
Diagnostics programs cannot be
executed.
Reboot the system from the diagnostics diskette.
Load default settings.
Diagnostics diskette.
Memory module.
System board.
Missing diagnostics files(s). Diagnostics diskette.