IBM NetVista, Руководство по техническому обслуживанию аппаратной части

Страница: 41 / 155

41
BIOS-contained Model Number and Serial Number
The model number and serial number information is stored in BIOS ROM and displayed in the “Product Data” of BIOS Setup
main menu. If a repair is completed by replacing the system board or installing a new BIOS ROM, then you need to enter the
original system model number and serial number in the new BIOS ROM.
To enter the model number and serial number into BIOS:
The following procedure is for the models come with the diskette.
1.
Prepare a bootable DOS diskette with VPD.EXE files.
2. Insert the diskette and boot from drive A.
WARNING:
Do not boot with any memory related driver such as HIMEM.SYS, EMS.SYS.
3. At the DOS prompt, type
A: >VPD
then press
Enter
. You will be asked if you want to update the serial number, type
Y
to continue. When the screen shows:
Serial Number:
Enter the serial number and press
Enter
to continue. You can type a maximum of 7 characters (without spaces).
Follow the instructions on the screen to complete the procedure.
4. Type
A: >VPD
and press
Enter
to display and verify your input model number and serial number information.
The following procedure is for the FDDless models.
For the FDDless models, there is a factory-executed program run before F2 (functional test 2) to load FDDless default setting
and the startup sequence will be USB FDD, HDD and then CD-ROM. That’s to say, servicer should bring USB FDD as
fixture and follow the procedure stated (step 1 ~ step 4) above to verify the model number and serial number information.