IBM NetVista, Руководство по техническому обслуживанию аппаратной части

Страница: 43 / 155

43
The following table lists specific keys on the keyboard that will help you move through the Setup menus:
Keys Function
Down- or up-arrow key Use these arrow keys to highlight an option on the menu. (Press the
Enter
key to choose
the option.)
Left- or right-arrow key Use these arrow keys to make a selection and change an option’s setting. In some menus,
you can use these keys to move from one field to another.
F10 Press this key to save your changes.
Enter Press this key to select a highlighted option from a menu.
F2 Press this key if you want help for a selected item in a menu.
Esc After viewing or making changes to the settings on a menu, press this key to exit the menu.
+ - Use the + and – keys to change the value in the Date and Time setting.
Changing Parameter Settings
In the Setup menus, the configuration information that you can change is enclosed in brackets like these: [ ]. You cannot
change any information that is not enclosed in brackets. Use the up- or down-arrow keys to highlight options then press
Enter to display a menu. When changing the setting of a particular parameter, highlight the setting then use the left- or right-
arrow key to change the setting.
System Summary
Choose this option to learn the system configuration of this machine. The pop-up menu will show the processor type,
processor speed, L1 chace status, L2 cache status, system memory speed, Drive A type, Drive B type, IDE Primary Master,
IDE Primary slave, IDE Secondary Master, IDE Secondary Slave and system memory total.
Product Data
This pop-up menu will show the following information of the system.
Machine Type/Model
Flash EEPROM Revision Level
System Serial Number
BIOS Date
BIOS Mode
Device and I/O Ports
Select this option to configure the onboard I/O, IRQ, and DMA assignment of the system.
Drive A
Determines the type of Drive A. (Optional items: None; 720K, 3.5 in.; 1.44M, 3.5 in.)