IBM IntelliStation 6836, Руководство по техническому обслуживанию аппаратной части

Страница: 82 / 164

3. Remove the cover (see “Removing the side cover” on page 48).
4.
Removing the main Bezel (see “Removing the side cover” on page 48).
5. Remove the support bracket (see “Removing the support bracket assembly” on
page 48).
6. Disconnect the cables.
7. Remove the adapter cards and both adapter retaining brackets (see “Installing
an adapter” on page 38).
8. Remove the hot-swap hard disk drive cage (see “Drive cage removal” on
page 72).
9.
Remove memory modules (see “Installing memory modules” on page 43).
10. Remove microprocessors and/or terminator cards (see “Removing a
microprocessor Types 6836 and 6846” on page 69).
11.
Remove screws and lift the system board out of the computer.
Power supply removal
Before you begin:
v
Read “Safety information” on page 113.
v
Review the information in “Before you begin” on page 29.
To remove the power supply, do the following:
1.
Power-off the computer, if it is on.
2. Unplug the computer.
3.
Remove the cover (see “Removing the side cover” on page 48).
4. Disconnect the power cables from the system board.
5. Remove the 5.25 drive cage (see “Drive cage removal” on page 72)
6. Remove the screws from the rear of the computer.
7. Gently move the power supply away from the chassis and lift it out of the
computer.
74
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846