IBM IntelliStation 6836, Руководство по техническому обслуживанию аппаратной части

Страница: 10 / 164

002
If the Power Management feature is enabled, do the following:
1.
Start the Configuration/Setup Utility program (see “Starting the
Configuration/Setup Utility program” on page 23.)
2. Select Power Management from the Configuration/Setup Utility program
menu.
3. Select APM .
4. Be sure APM BIOS Mode is set to Disabled . If it is not, press Left Arrow (
}
) or
Right Arrow (Æ) to change the setting.
5. Select Automatic Hardware Power Management .
6.
Set
Automatic Hardware Power Management
to
Disabled
.
7. If the problem persists, continue to
003
.
003
Run the Diagnostic programs. If necessary, refer to “Starting the diagnostic
programs” on page 15.
v
If you receive an error, replace the part that the diagnostic program calls out or
go to Chapter 3, “Diagnostics” on page 13.
v
If the test stops and you cannot continue, replace the last device tested.
2
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846