IBM IntelliStation 6836, Руководство по техническому обслуживанию аппаратной части

Страница: 31 / 164

Chapter 4. Configuration
Using the Configuration/Setup Utility program . . 23
Starting the Configuration/Setup Utility program 23
Choices available from the Configuration/Setup
Utility main menu .
. . . . . . . . . . 23
Using passwords . . . . . . . . . . . 26
Using the SCSISelect Utility program (some models) 26
Starting the SCSISelect Utility program . . . . 26
Choices available from the SCSISelect menu . . 26
The following configuration programs are provided with your computer:
v
Configuration/Setup Utility program
This program is part of the BIOS code that comes with your computer. You can
use this program to configure serial- and parallel-connector assignments, change
the drive startup sequence, set the date and time, and set passwords. See “Using
the Configuration/Setup Utility program” on page 23 for more information.
v
SCSISelect Utility program
(some models)
With the built-in SCSISelect Utility program, you can configure the devices that
are attached to the optional SCSI adapter. See “Using the SCSISelect Utility
program (some models)” on page 26 for more information.
Using the Configuration/Setup Utility program
This section provides the instructions for starting the Configuration/Setup Utility
program and descriptions of the menu choices that are available.
Starting the Configuration/Setup Utility program
Complete the following steps to start the Configuration/Setup Utility program:
1.
Turn on the computer and watch the monitor screen.
2. When the message,
Press F1 for Configuration/Setup
, appears, press F1.
3.
Follow the instructions that appear on the screen.
Choices available from the Configuration/Setup Utility main
menu
From the Configuration/Setup Utility main menu, you can select settings that you
want to change. The Configuration/Setup Utility main menu is similar to the
© Copyright IBM Corp. 2000
23