IBM IntelliStation 6836, Руководство по техническому обслуживанию аппаратной части

Страница: 102 / 164

Diagnostic Error Code FRU/Action
014-196-XXX Parallel port test halt, error
threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
014-197-XXX
Parallel port test warning
1. Make sure the component that is called
out is connected and/or enabled
2.
Re-run test
3.
Component that is called out in warning
statement
4. Component under test
014-198-XXX Parallel port test aborted
1. If a component is called out, make sure
it is connected and/or enabled
2. Flash the system and re-test
3. Go to the
″
Undetermined problems
″
section
014-199-XXX Parallel port test failed, cause
unknown
1. Go to the
″
Undetermined problems
″
section
2. Flash the system and re-test
3. Replace component under function test
014-2XX-XXX 014-3XX-XXX Parallel port
failure
1. External parallel device
2. System board
015-000-XXX USB port Interface Test Passed
1. No action
015-001-XXX USB port Presence
1. Remove USB device(s) and re-test
2. System board
015-002-XXX USB port Timeout
1. Remove USB device(s) and re-test
2.
System board
015-015-XXX USB port External Loopback
failure
1. Remove USB device(s) and re-test
2. System board
015-027-XXX USB port Configuration/Setup
error
1. Flash the system
2. System board
015-032-XXX USB port Device Controller
failure
1. System board
015-034-XXX USB port bufferallocation failure
1. Reboot the system
2. Flash the system
3. Run memory test
4. System board
015-035-XXX USB port Reset condition
detected
1.
Remove USB device(s) and re-test
2.
System board
015-036-XXX USB port Register error
1. System board
015-040-XXX USB port IRQ failure
1. Run setup and check for conflicts
2. Flash the system
3. System board
015-195-XXX USB port Test aborted by user
1. Information
2.
Re-start the test, if necessary
94
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846