IBM H Series, Инструкция по установке и обслуживанию

Страница: 133 / 438

Table 3-1 (Page 24 of 40). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
2BA00371 Service Processor reports Locked
CEC Fan #1 1. Remove obstruction from CEC Fan 1.
2. Replace CEC Fan 1.
3. If problem persists, replace power
supply.
4. Replace I/O Board (See notes on 3-1.)
2BA00372 Service Processor reports Locked
CEC Fan #2 1. Remove obstruction from CEC Fan 2.
2. Replace CEC Fan 2.
3. If problem persists, replace power
supply.
4. Replace I/O Board (See notes on 3-1.)
2BA00373 Service Processor reports Locked
CEC Fan #3 1. Remove obstruction from CEC Fan 3.
2. Replace CEC Fan 3.
3. If problem persists, replace power
supply.
4. Replace I/O Board (See notes on 3-1.)
2BA00374 Service Processor reports power
supply #1 and DASD Fans failed 1. Replace power supply #1 and Failing
DASD Fans.
2. Replace I/O Board (See notes on 3-1.)
2BA00375 Service Processor reports power
supply #2 and DASD Fans failed 1. Replace power supply #2 and Failing
DASD Fans.
2. Replace I/O Board (See notes on 3-1.)
2BA00376 Service Processor reports power
supply failure 1. Replace failing power supply.
2. Replace I/O Board (See notes on 3-1.)
2BA00399 Service Processor reports Unsup-
ported value in EPOW Replace I/O Board (See notes on 3-1.)
40100005 A loss of system power detected Possible main power loss. If not, replace
power supply.
40100007 Immediate shutdown Possible main power loss. If not, replace
power supply.
40110000 Redundant power supply fail 1. Power supply.
2. I/O board (See notes on 3-1.)
3. Service Processor (Model H50 only).
40110001 Power supply fail 1. Power supply.
2. I/O board. (See notes on 3-1.)
3. Service Processor (Model H50 only).
40110002 Voltage is present, but not detected
on both processor cards For Model H50:
1. Check cable between CPU card and
PDB for proper seating.
2. Replace power supply.
3. Replace PDB.
For Model H70: Replace power supply.
Chapter 3. Error Code to FRU Index
3-25