IBM H Series, Инструкция по установке и обслуживанию

Страница: 118 / 438

Table 3-1 (Page 9 of 40). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
25A80211 Setenv/$Setenv parameter error -
value contains a null character Refer to Action under error code
25A80xxx.
25AA0xxx EEPROM problems EEPROM problem resolution:
1. Ensure that the EEPROM Security
jumper is in the correct position if
doing a privileged-access password
install.
2. Retry the operation.
3. If retries do not solve the problem,
replace the I/O board. (See notes on
3-1.)
25AA0000 Unable to unlock EEPROM Refer to Action under error code
25AA0xxx.
25AA0001 Read-Recv error Refer to Action under error code
25AA0xxx.
25AA0002 Read-Trans error Refer to Action under error code
25AA0xxx.
25AA0003 Write-enable error Refer to Action under error code
25AA0xxx.
25AA0004 Write-recv error Refer to Action under error code
25AA0xxx.
25AA0005 Write-disable error Refer to Action under error code
25AA0xxx.
25AA0006 Write-Trans error Refer to Action under error code
25AA0xxx.
25AA0007 Unable to lock EEPROM Refer to Action under error code
25AA0xxx.
25B00001 No memory modules detected in
either memory card 1 or 2 1. Reseat any installed memory card(s)
and retry.
2. Reseat any installed memory modules
on the installed memory cards.
3. Replace memory card(s).
25Cyyxxx Memory card problems See “Memory PD Bits” on page 3-42 for
definition of "yy".
Use the location code obtained from the
SMS Error Log utility (described in MAP
Step 1020-4) to identify which memory
module (or memory module pair) the error
is reported against.
3-10
RS/6000 Enterprise Server Model H Series Installation and Service Guide