IBM H Series Скачать руководство пользователя страница 276

Страница: 276 / 438

Removal

DANGER

Do not attempt to open the covers of the power supply. Power sup-
plies are not serviceable and are to be replaced as a unit.

1. If you have not already done so, open the rear door of the rack unit and locate

the power supply you need to work on.

2. Unplug the power cord from the power supply.

3. Reposition any other cables necessary to allow the removal of the power supply.

4. Remove the screw from the center of the power supply handle and save it for

replacement.

5. Grasp the handle of the power supply and pivot it upward.

6. Pull the power supply out of the drawer.

7-22

RS/6000 Enterprise Server Model H Series Installation and Service Guide

Содержание H Series























































































































































































































































































































































































































































Результаты поиска

Содержание H Series

Отзывы:

Похожие инструкции для H Series

Бренды по названию

Популярные бренды

IBM H Series, Инструкция по установке и обслуживанию

Результаты поиска

Содержание H Series

Отзывы:

Похожие инструкции для H Series

Бренды по названию

Популярные бренды