IBM H SERIES RS/6000, Руководство пользователя

Страница: 169 / 290

This service aid may be accessed directly from the AIX command line, by entering:
/usr/lpp/diagnostics/bin/uspchrp -b
Save or Restore Hardware Management Policies Service Aid
This service aid is used with Ring Indicate Power On Policy, Surveillance Policy,
Remote Maintenance Policy and Reboot Policy.
Ÿ
Save Hardware Management Policies
This selection will write all of the settings for the hardware management policies
to the file: /etc/lpp/diagnostics/data/hmpolicies
Ÿ
Restore Hardware Management Policies
This selection will restore all of the settings for the hardware management poli-
cies from the contents of the file: /etc/lpp/diagnostics/data/hmpolicies
This service aid may be accessed directly from the AIX command line, by entering:
/usr/lpp/diagnostics/bin/uspchrp -a
Diagnostic Package Utility Service Aid
The Diagnostic Package Utility Service Aid allows the user to perform the following
actions:
Ÿ
Format a 1, 2, or 4MB diskette
Ÿ
Create a Standalone Diagnostic Package Configuration Diskette
The Standalone Diagnostic Package Configuration Diskette allows the following
to be changed from the console:
– Default refresh rate for a LFT
The refresh rate used by the standalone diagnostic package is 60Hz. If the
display's refresh rate is 77Hz, then set the refresh rate to 77.
– Different async terminal console
A console configuration file that allows a terminal attached to any RS232 or
RS422 adapter to be selected as a console device can be created using this
service aid. The default device is a RS232 tty attached to the first standard
serial port (S1).
Chapter 7. Using the Service Aids
7-9