IBM eServer 370 xSeries, Руководство пользователя

Страница: 24 / 218

rebuilt. When the light flashes rapidly (three flashes per second), the
ServeRAID controller is identifying the drive.
7
Hard disk drive in-use light: Each hot-swap hard disk drive has a Hard Disk
Drive In-Use light. When the green light for a hard disk drive is on, the drive
is being accessed.
8
Diskette-eject button: Press this button to eject a diskette from the drive.
9
Diskette drive in-use light: When this light is lit, the diskette drive is being
accessed.
1
Power control button: Press this button to manually turn the server on or
off. See “Turning on the server” and “Turning off the server” on page 9 for
more information.
11
Reset button: Press this button to reset the system and run the power-on
self-test (POST).
Turning on the server
Use the following instructions to turn on the server.
13
DANGER
Overloading an electrical circuit breaker is potentially a fire
hazard and a shock hazard under certain conditions. To avoid
these hazards, adhere to the instructions in the following
statements.
1. If you are connecting to a 100–127 V ac power source,
connect each power cord to a separate branch circuit.
2. If you are connecting to a 200–240 V ac power source and
the branch circuit breaker rating is:
a. 13 amps or less, connect each power cord to a separate
branch circuit.
b. 14 amps to 19 amps, do not connect more than two
power cords to the same branch circuit.
c. 20 amps or greater, you may connect up to three power
cords to the same branch circuit.
You can turn the server on by pressing the Power Control button on the front of
the server.
The server can also be powered on by the Advanced System Management PCI
adapter, Wake on LAN, Wake on Real-Time Clock Alarm, or Wake on Ring.
Note: To enable the wakeup features, you must install the appropriate software
and hardware in your server. For complete details, refer to the
documentation that comes with your Ethernet adapter.
8
xSeries 370 User's Reference