IBM eServer 130 xSeries, Руководство пользователя

Страница: 30 / 156

16
IBM xSeries 130: User’s Reference
5. Use the following case-sensitive user name and password to log in.
In the Username field, type
Administrator
and in the Password field, type
password
Note: Change these defaults to ensure the security of your system.
6. You can leave the Domain field blank. Make sure the Save this password in
your password list check box is cleared, and then click OK . You can manage
your appliance server and Web sites from this page.
Note: The first time you connect your remote workstation to the appliance server,
you are prompted to install XML and Swing components on the Web-
browser for the remote workstation you are using to manage the
appliance. Follow the on-screen instructions to install these components.
When prompted, click
Run from current location ; and then, close and
restart Internet Explorer before you proceed.
The system is connected to the appliance through UM Services. Complete
documentation on how to use UM Services is included on the
Documentation CD .
Note: By default, the appliance server uses DHCP. If you do not have a DHCP
server on the network, the appliance is assigned an IP address of 169.254.x.y
(where x and y are random numbers) and a subnet mask of 255.255.0.0.
Continue with the “Appliance setup and configuration Web page”.
Appliance setup and configuration Web page
You can set up and configure your appliance server from the xSeries 130 Web page.
This page provides configuration information, documentation, software help, and brief
troubleshooting information. The directions and information you need to set up your
appliance server and transfer Web content are found on this Web site. To set up and
transfer Web content to the appliance server do the following:
1. From the Web page, click Setup Guide for an overview of the tasks to complete,
and to display the options available for adding Web content to your appliance
server. For more information on the features of the UM Services Web page see
the “xSeries 130 Configuration Tools” on page 17.
2. After you create your Web content, you can add it to the appliance server using
the Terminal Services. You can use Web-based Terminal Services through UM
Services or the Terminal Services client on your remote management
workstation.
3. Manage your Web site and appliance server using the tools on the Appliance
setup and configuration Web page.