IBM eServer 130 xSeries, Руководство пользователя

Страница: 21 / 156

Chapter 1. Introduction
7
Rear view
Figure 3. Identifying appliance server controls and indicators on the xSeries 130 model 8654
Ethernet 1 speed indicator: This green LED lights when the speed of the Ethernet
LAN that is connected to Ethernet port 1 is 100 Mbps.
Ethernet 1 link indicator: This green LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 1.
Select light: This green LED lights when the monitor, keyboard, and mouse are
logically connected to this appliance server. This light duplicates the LED in the select
button/indicator on the front of the appliance server.
System-error light: This amber LED lights when a system error occurs. An LED on
the Light Path Diagnostics panel on the system board will also be on to further isolate
the error. This light duplicates the system-error light on the front of the server.
Power-on light: This green LED lights and stays on when you turn on your appliance
server. This light duplicates the power-on light on the front of the appliance server.
Ethernet 2 link indicator: This green LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 2.
Ethernet 2 speed indicator: This green LED lights when the speed of the Ethernet
LAN that is connected to Ethernet port 2 is 100 Mbps.
Ethernet 1 speed
indicator (green)
Ethernet 2 speed
indicator (green)
Ethernet 1 link
indicator (green)
Ethernet 2 link
indicator (green)
Power-on
light (green)
Select light (green)
System-error
light (amber)