IBM Elastic Storage System 3200 Скачать руководство пользователя страница 43

Страница: 43 / 156

Chapter 3. Planning for hardware

Before the IBM Service Support Representative (SSR) installs the system hardware, the customer must

provide a plan that explains where and how the hardware will be installed, configured, and connected in

the customer's network. Ensure that the system's physical configuration records are easily accessible to

be used as a reference as needed.
The customers have to work with the IBM technical team to plan for installation and deployment of

IBM Elastic Storage System 3200.

Planning for site preparation

This information is intended to help you prepare your physical site for the installation of IBM Elastic

Storage System 3200. Marketing and installation planning representatives are also available to help you

plan your installation. Proper planning for your new system facilitates a smooth installation and a fast

system startup.
The use of the terms, “server”, “processor”, “system” and “all models” in the following information refer

to the IBM Elastic Storage System 3200.

Site preparation and physical planning

For detailed guidelines about site preparation and physical planning, see the Site preparation and physical

planning document.

Planning for hardware installation

Before the IBM SSR installs the system, you must plan the physical configuration and the initial data

configuration.
Certain physical site specifications must be met before you can set up your system. This activity includes

verifying that adequate space is available, and that requirements for power, network and environmental

conditions are met.
Important: The IBM SSR refers to these system configuration details when they perform the system

installation, so it is important that these records are complete and accurate.

1. Review all the guidelines in the Planning topics to understand where the system can be installed and

identify all prerequisites, such as building structure, equipment rack, environmental controls, power

supply, and accessibility.
If there are dependencies identified, you need to resolve them before the IBM SSR installs your system

hardware.

2. Use the hardware locations of enclosures and other devices to identify the rack locations where the

IBM SSR will install each enclosure.

Planning for racks

For detailed rack specification information on the 7965-S42 rack, see: Planning for the 7965-S42 rack.
If you do not have a 7965-S42 rack and want to install the system into a non-IBM rack, see “ IBM

Elastic Storage System 3200 physical environment requirements” on page 30. Ensure that the physical

environment meet the specified requirements, such as rack space, power, and environmental conditions.

Содержание Elastic Storage System 3200





























































































































































Результаты поиска

Содержание Elastic Storage System 3200

Отзывы:

Похожие инструкции для Elastic Storage System 3200

Бренды по названию

Популярные бренды

IBM Elastic Storage System 3200, Руководство по планированию и установке оборудования

Результаты поиска

Содержание Elastic Storage System 3200

Отзывы:

Похожие инструкции для Elastic Storage System 3200

Бренды по названию

Популярные бренды