IBM DS8700, Введение и руководство по планированию

Страница: 229 / 256

Table 72. Outbound (call home) work sheet (continued)
Item or Setting Instructions MC1 MC2 (if applicable)
Delivery method for
dumps and traces Check Use the call
home setup if you
want the management
console to use the call
home settings for
dump and trace
call-home
transmissions. Check
Use FTP if you want to
send dumps and traces
directly to the IBM FTP
data repository server.
FTP is recommended if
VPN or SSL
connectivity is not
provided. If either VPN
or SSL is configured,
FTP is not needed.
Data is offloaded faster
if there is only a
modem that is available
for call home. (To use
FTP, you must connect
the management
console to your LAN
and provide a path to
the Internet from the
repository server.) If
you check
Use the call
home setup , you have
completed this work
sheet.
[ ] Use the call
home setup
[ ] Use FTP
[ ] Use the call
home setup
[ ] Use FTP
Do you use an FTP
firewall?
If you are using FTP to
deliver dump and trace
call-home
transmissions, check
Yes if your dump and
trace files cross a
firewall that filters FTP
traffic. Check
No if no
FTP firewall filters the
transmissions. If you
check
Yes , complete the
remaining work sheet
items. If you check
No ,
you have completed
this work sheet.
[ ] Yes
[ ] No [ ] Yes
[ ] No
FTP firewall settings
Table 73 on page 208 lists the types of FTP firewall that are supported by the management console. Review Table 73
on page 208 to determine the type of FTP to use if you plan to send dumps and traces to the IBM service center and
if the dumps and traces pass through an FTP firewall.
Appendix E. Remote support work sheets
207