IBM DS8700, Введение и руководство по планированию

Страница: 221 / 256

Table 68. Management console network settings work sheet (continued)
Item or
Setting
Instructions MC1 MC2 (if applicable)
242x private
network
address
ranges Can the default 242x private
network address ranges be
used? For more information,
see “TCP/IP address ranges”
on page 200. [ ] Yes: Use default ranges.
[ ] No: Check off the address
range option to use. Table 70 on
page 201 provides the addresses
associated with each option.
[ ] Option 1
[ ] Option 2
[ ] Option 3
[ ] Yes: Use default ranges.
[ ] No: Check off the address
range option to use. Table 70 on
page 201 provides the addresses
associated with each option.
[ ] Option 1
[ ] Option 2
[ ] Option 3
IPv4 and
IPv6
config-
uration Select if the HMC is connected
to an IPv4 network, an IPv6
network, or a network that
supports both IPv4 and IPv6.
Select IPv6 only if you plan on
assigning or autoconfiguring
IPv6 addresses. IPv4 only [ ]
IPv6 only [ ]
Both IPv4 and IPv6 [ ] IPv4 only [ ]
IPv6 only [ ]
Both IPv4 and IPv6 [ ]
TCP/IP
interface
network
mask Record the dotted decimal
network mask that you want to
apply to the TCP/IP address
(for example,
127.123.546.0 ).
DNS settings Complete this section if you plan to use a domain name server (DNS) to resolve network names.
Name server
(DNS)
internet
address 1 Provide the dotted decimal
address of the name server to
be accessed by the MC
workstation (for example,
5.127.42.25 ).
Name server
domain
name 1 Provide the domain name of
the name server (for example,
medina.xyz.it ).
Name server
(DNS)
internet
address 2
(Optional) Provide the dotted decimal
address of the second name
server that this workstation can
access (for example,
5.127.42.252 ).
Tip: You can specify a second
name server when you
configure a backup or
secondary server for Copy
Services.
Name server
domain
name 2 If you have a second name
server, provide the domain
name of the second name
server (for example,
medina2.xyz.it ).
Routing settings Complete the following section if you want to specify a default gateway for routing. (See Note
following this table)
Gateway
address Confirm and record the dotted
decimal or symbolic name
address of the gateway (for
example,
8.127.155.254 or
londongate ).
Appendix D. Management console network settings
199