IBM DS3950, Руководство пользователя и инструкция по установке

Страница: 59 / 186

5.
Connect an LC-LC fibre-channel cable. For information about the LC-LC cable,
see “Using LC-LC fibre-channel cables” on page 37.
Removing SFP modules
Complete the following steps to remove the SFP module from the host port:
Attention: To avoid damage to the cable or to the SFP module, make sure that
you unplug the LC-LC fibre-channel cable before you remove the SFP module.
1. Remove the LC-LC fibre-channel cable from the SFP module. For more
information, see “Handling fibre-optic cables” on page 36.
2.
Unlock the SFP module latch:
v
For SFP modules that contain plastic tabs, unlock the SFP module latch by
pulling the plastic tab outward 10°, as shown in Figure 17.
v
For SFP modules that contain wire tabs, unlock the SFP module latch by
pulling the wire latch outward 90°, as shown in Figure 18 on page 36.
o
Protective
cap
Wire
tab
SFP
module
90
Figure 16. Installing an SFP module into the host port
o
Protective
cap
Wire
tab
SFP
module
90
Figure 17. Unlocking the SFP module latch - plastic variety
Chapter 3. Cabling the EXP395
35