IBM DS3950, Руководство пользователя и инструкция по установке

Страница: 15 / 186

About this document
This document provides instructions for installing and customizing the
configuration of your IBM
®
System Storage EXP395 storage expansion enclosure. It
also provides maintenance procedures and troubleshooting information.
Who should read this document
This document is intended for system operators and service technicians who have
extensive knowledge of fibre channel and network technology.
How this document is organized
Chapter 1, “Introduction,” on page 1 describes the IBM System Storage EXP395
storage expansion enclosure. This chapter includes an inventory checklist and an
overview of the storage expansion enclosure features, operating specifications, and
components.
Chapter 2, “Installing the EXP395,” on page 21 contains information on how to
install the EXP395.
Chapter 3, “Cabling the EXP395,” on page 31 contains information on how to cable
the EXP395.
Chapter 4, “Operating the EXP395,” on page 45 contains information on how to
power on and off the storage expansion enclosure, recover from an overheated
power supply and fan unit, troubleshoot the storage expansion enclosure, and
interpret LEDs.
Chapter 5, “Installing and replacing components,” on page 65 contains step-by-step
instructions about how to install or remove customer replaceable units (FRUs),
such as hard disk drives, power supply and fan units, filter and filter retainer,
environmental services modules (ESMs), midplane, and SFP modules.
Chapter 6, “Hardware maintenance,” on page 93 describes problems and
symptoms that are specific to your storage expansion enclosure. It also provides a
parts list for the EXP395.
Appendix A, “Records,” on page 105 provides a table that you can use to record
and update important information about your EXP395, including serial number
and device records. Whenever you add options to your EXP395, be sure to update
the information in this table.
Appendix B, “Rack mounting template,” on page 109 provides the rack mounting
templates for installation of the EXP395. If you want to tear out the templates from
the document for use during installation, use these copies of the templates.
Appendix C, “Specifications for non-IBM rack installation,” on page 113 provides
safety requirements and rack specifications for installing DS3950 storage
subsystems and EXP395 storage expansion enclosures into non-IBM racks.
Appendix D, “Power cords,” on page 121 lists power cord information for the
EXP395.
© Copyright IBM Corp. 2009, 2013
xv