To run the command remotely over the LAN, enter the following chassis identify command:
ipmitool -I lanplus -H <hostname> -U <username> -P <password> chassis identify <interval>
Preparing the 8001-12C or 8005-12N system to remove and replace
internal parts
Learn how to prepare the IBM Power System S821LC (8001-12C) or the IBM CS821 (8005-12N) system to
remove and replace internal parts.
Procedure
1.
Complete the prerequisite tasks. For instructions, see “Before you begin” on page 65.
2.
Identify the part and the system that you will be working on. For instructions, see “Identifying the
system that contains the part to replace” on page 68.
3.
Attach the electrostatic discharge (ESD) wrist strap.
Attention:
v
Attach an electrostatic discharge (ESD) wrist strap to the front ESD jack, to the rear ESD jack, or to
an unpainted metal surface of your hardware to prevent the electrostatic discharge from damaging
your hardware.
v
When you use an ESD wrist strap, follow all electrical safety procedures. An ESD wrist strap is
used for static control. It does not increase or decrease your risk of receiving electric shock when
using or working on electrical equipment.
v
If you do not have an ESD wrist strap, just prior to removing the product from ESD packaging and
installing or replacing hardware, touch an unpainted metal surface of the system for a minimum of
5 seconds.
4.
Stop the system. For instructions, see “Stopping the 8001-12C, 8001-22C, 8005-12N, or 8005-22N
system” on page 74.
5.
Disconnect the power source from the system by unplugging the system. For instructions, see
“Disconnecting the power cords from an 8001-12C, 8001-22C, 8005-12N, or 8005-22N system” on page
85.
Note:
The system might be equipped with redundant power supply. Before you continue with this
procedure, ensure that all power to your system is disconnected.
(L003)
1
2
or
!
1
2
70
Power Systems: Servicing the IBM Power System S821LC (8001-12C) or the IBM CS821 (8005-12N)
Содержание CS821
