background image

52
Brocade 2-Port 10GbE Converged Network Adapter for IBM BladeCenter Installation and User’s Guide

Important notes

C

Adobe and PostScript are either registered trademarks or trademarks of Adobe Systems 
Incorporated in the United States and/or other countries.

Cell Broadband Engine is a trademark of Sony Computer Entertainment, Inc., in the United States, 
other countries, or both and is used under license therefrom. 

Intel, Intel Xeon, Itanium, and Pentium are trademarks or registered trademarks of Intel 
Corporation or its subsidiaries in the United States and other countries.

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc., in the United 
States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. 

Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, 
other countries, or both.

Brocade is a registered trademark of Brocade Communications Corporation.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Other company, product, or service names may be trademarks or service marks of others.

Important notes

Processor speed indicates the internal clock speed of the microprocessor; other factors also affect 
application performance. 

CD or DVD drive speed is the variable read rate. Actual speeds vary and are often less than the 
possible maximum.

When referring to processor storage, real and virtual storage, or channel volume, KB stands for 
1024 bytes, MB stands for 1 048 576 bytes, and GB stands for 1 073 741 824 bytes.

When referring to hard disk drive capacity or communications volume, MB stands for 1 000 000 
bytes, and GB stands for 1 000 000 000 bytes. Total user-accessible capacity can vary depending 
on operating environments.

Maximum internal hard disk drive capacities assume the replacement of any standard hard disk 
drives and population of all hard disk drive bays with the largest currently supported drives that are 
available from IBM.

Maximum memory might require replacement of the standard memory with an optional memory 
module. 

IBM makes no representation or warranties regarding non-IBM products and services that are 
ServerProven®, including but not limited to the implied warranties of merchantability and fitness 
for a particular purpose. These products are offered and warranted solely by third parties.

IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for 
the non-IBM products is provided by the third party, not IBM.

Some software might differ from its retail version (if available) and might not include user manuals 
or all program functionality.

Содержание Brocade











































































Отзывы: