IBM Brocade Скачать руководство пользователя | Manualshive

Страница: 37 / 74

background image

©Copyright IBM Corp. 2010

25

Chapter

3

Updating the boot code and installing device drivers

After you install the Brocade 2-Port 10Gb Converged Network Adapter, make sure that the latest
boot code is installed; then, install the device drivers.

Notes:

1. The supported operating systems vary, depending on the types of blade servers, other

hardware, and the software packages that you are using.

2. This document might contain references or links to other companies' Web sites, also known as

non-IBM Web sites. As of the date of this document, the addresses of non-IBM Web sites are
correct. However, these addresses might be updated after this document has been published.
Certain conditions apply to the use of non-IBM Web sites. For additional information, see

Appendix C, “Notices”

.

3. Changes are made periodically to the IBM Web site. Procedures for locating firmware and

documentation might vary slightly from what is described in this document.

4. For the latest information about operating-system support, versions of device drivers, utilities,

software installer packages, and additional documentation for the Brocade 2-Port 10Gb
Converged Network Adapter, go to the following location:

http://www.brocade.com/sites/dotcom/services-support/drivers-downloads/CNA/IBM.page.

Installing the device drivers and HCM

The Brocade 2-Port 10Gb Converged Network Adapter for IBM BladeCenter requires installation of
both the storage (FC/FCoE) and the network (Ethernet/NIC) driver. Both of these drivers install as
one package. The latest driver packages, boot code image, utilities, and additional documentation
for supported operating systems are provided at the following location:

http://www.brocade.com/sites/dotcom/services-support/drivers-downloads/CNA/IBM.page.

The GUI-based Brocade Adapter Software Installer (BASI) application installs the Host Connectivity
Manager (HCM), all driver packages, and utilities based on your host operating system.

Installing software using BASI

This section contains instructions for using the GUI-based BASI only. For detailed instructions on
installing software using BASI, BASI commands, native installer scripts, and operating system
commands, refer to the

Brocade Adapters Installation and Reference Manual

at the following

location.

http://www.brocade.com/sites/dotcom/services-support/drivers-downloads/CNA/IBM.page.

«
...
35
36
37
38
39
...
»

Содержание Brocade











































































Отзывы:

Нет отзывов

Похожие инструкции для Brocade

Бренд: Oki Страницы: 60

Бренд: U.S. Boiler Company Страницы: 20

Бренд: SUNRICH TECHNOLOGY Страницы: 7

1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps

Бренд: Adaptec Страницы: 82

Бренд: Renesas Страницы: 2

Бренд: Tripp Lite Страницы: 12

Бренд: Conceptronic Страницы: 209

Бренд: Linksys Страницы: 75

Бренд: Asus Страницы: 21

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 48

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 4

Бренд: Asus Страницы: 13

USB-BT211 Mini Bluetooth Dongle

Бренд: Asus Страницы: 41

Бренд: Asus Страницы: 4

Бренд: Asus Страницы: 54

Бренд: Asus Страницы: 128

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды