IBM BladeCenter JS20, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 125 / 218

Service
request
number
SRN
source
Failing
Function
Code Description and action
651-734 G 292 Intermediate or system bus data parity error.
651-735 G 292 Intermediate or system bus time-out error.
651-736 G 292 Intermediate or system bus time-out error.
651-740 G 2D3 Note: Ensure that the system IPLROS and service processor are at the
latest firmware level before removing any parts from the system.
651-741 G 2D3 Service processor error accessing special registers.
651-742 G 2D3 Service processor reports unknown communication error.
651-743 G 2D5 Service processor error accessing Vital Product Data EEPROM.
651-745 G 2D9 Service processor error accessing power controller.
651-746 G 2D4 Service processor error accessing fan sensor.
651-747 G 2D5 Service processor error accessing thermal sensor.
651-748 G 2E2 Service processor error accessing voltage sensor.
651-750 G 2D4 Service processor detected NVRAM error.
651-751 G 2D4 Service processor error accessing real-time clock/time-of-day clock.
651-752 G 2D4 Service processor error accessing JTAG/COP controller/hardware.
651-753 G 151
2D4
Service processor detects loss of voltage from the time-of-day clock backup
battery.
651-770 G 292 Intermediate or system bus address parity error.
651-771 G 292 Intermediate or system bus data parity error.
651-772 G 292 Intermediate or system bus time-out error.
651-773 G 227 Intermediate or system bus data parity error.
651-780 G 2C7
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-781 G 2C7
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-784 G 302
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-785 G 303
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-786 G 304
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-789 G 2CD
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-78A G 2CE
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-78B G 2CC
214
Uncorrectable memory error. Action: Use Chapter 4, “Problem
determination procedures for AIX and Linux,” on page 21.
651-809 G Power fault warning due to unspecified cause. Action: Use Chapter 4,
“Problem determination procedures for AIX and Linux,” on page 21.
651-810 G 2E2 Over-voltage condition was detected. Action: Shut the system down and do
the following before replacing any FRUs:
1. Visually inspect the power cables and reseat the connectors.
2. Run the following command diag -Avd sysplanar0. When the Resource
Repair Action menu displays, select sysplanar0.
Chapter 10. Symptom-to-FRU index
115