IBM BladeCenter JS20, Руководство по техническому обслуживанию и устранению неисправностей, Страница: 142 / 218

Service
request
number
SRN
source Description FRU/action
A12-04x G A non-critical error has been detected, a
memory control subsystem internal error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-05x G A non-critical error has been detected, a
memory address error (invalid address or
access attempt).
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-06x G A non-critical error has been detected, a
memory data error (bad data going to
memory).
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-07x G A non-critical error has been detected, a
memory bus/switch internal error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-08x G A non-critical error has been detected, a
memory time-out error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-09x G A non-critical error has been detected, a
system bus parity error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-10x G A non-critical error has been detected, a
system bus time-out error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-11x G A non-critical error has been detected, a
system bus protocol/transfer error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
132
BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide