IBM BladeCenter HS22V, Инструкция по установке и эксплуатации

Страница: 75 / 108

v
User Security
Select this choice to set, change, or clear passwords. See “Using passwords” for
more information.
v
Save Settings
Select this choice to save the changes that you have made in the settings.
v
Restore Settings
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
v Load Default Settings
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
v Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.
Using passwords
Use this information to set, change, or delete a power-on password.
You can set, change, and delete a power-on password in the Setup/Configuration
utility by selecting
System Settings then System Security .
If you set a power-on password, you must type the power-on password to
complete the system startup and to have access to the Setup utility.
You can use any combination of up to seven characters (A - Z, a - z, and 0 - 9) for
the password. Keep a record of your password in a secure place.
If you forget the power-on password, you can regain access to the blade server
either by removing the blade server battery and then reinstalling it or by using the
power-on password override switch (see the
Problem Determination and Service
Guide on the Documentation CD for instructions).
Using the ServerGuide Setup and Installation CD
Use this information as an overview for using the ServerGuide Setup and
Installation CD.
The ServerGuide Setup and Installation CD contains a setup and installation program
that is designed for your blade server. The ServerGuide program detects the blade
server model and optional hardware devices that are installed and uses that
information during setup to configure the hardware. The ServerGuide program
simplifies operating-system installations by providing updated device drivers and,
in some cases, installing them automatically.
You can download a free image of the ServerGuide Setup and Installation CD or
purchase the CD from the ServerGuide fulfillment Web site at
http://www.ibm.com/systems/management/serverguide/sub.html. To download
the free image, click
IBM Service and Support Site .
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is in this document.
Chapter 4. Configuring the blade server
59