IBM BladeCenter HS22V, Инструкция по установке и эксплуатации

Страница: 56 / 108

9. Firmly press on the indicated locations to seat the expansion card.
Note: For device-driver and configuration information to complete the
installation of the expansion card, see the documentation that comes with the
expansion card.
10. If you have other devices to install or remove, do so now; otherwise, go to
“Completing the installation” on page 49.
Removing a CIOv-form-factor expansion card
Use these instructions to remove a CIOv-form-factor expansion card from the blade
server.
The following illustration shows how to remove a vertical-combination-I/O (CIOv)
expansion card.
Expansion
card
To remove a CIOv expansion card, complete the following steps:
1. Before you begin, read “Safety” on page v and “Installation guidelines” on
page 19.
2.
If the blade server is installed in a BladeCenter unit, remove it (see “Removing
the blade server from the BladeCenter unit” on page 21 for instructions).
3. Carefully lay the blade server on a flat, static-protective surface.
4. Open the blade server cover (see “Removing the blade server cover” on page
22 for instructions).
5. If an optional expansion unit is installed, remove the expansion unit (see
“Removing an optional expansion unit” on page 24).
40
BladeCenter HS22V Type 7871 and 1949: Installation and User's Guide