IBM BladeCenter HS12 Type 1916, Руководство по обслуживанию

Страница: 82 / 204

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 4, “Parts listing, Types 8014, 8028 and 1916,” on page 25 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Beep code Description Action
1-1-3 CMOS write/read test failed.
1.
Reseat the battery. See “Removing the
battery” on page 57 and “Installing the
battery” on page 58.
2. Replace the following components one at a
time, in the order shown, restarting the
blade server each time:
a. Battery - See “Removing the battery” on
page 57 and“Installing the battery” on
page 58.
b. (Trained service technician only)
System-board assembly - See “Removing
the system-board assembly” on page 65
and “Installing the system-board
assembly” on page 66.
1-1-4 BIOS ROM checksum failed.
1. Update the BIOS code. Go to
http://www.ibm.com/systems/support/.
2. Reseat the DIMMs. See “Removing a
memory module” on page 44 and
“Installing a memory module” on page 46.
3. Replace the following components one at a
time, in the order shown, restarting the
blade server each time:
a.
DIMMs - See “Removing a memory
module” on page 44 and “Installing a
memory module” on page 46.
b. (Trained service technician only)
System-board assembly - See “Removing
the system-board assembly” on page 65
and “Installing the system-board
assembly” on page 66.
1-2-1 Programmable interval timer failed. (Trained service technician only) Replace the
system-board assembly. See “Removing the
system-board assembly” on page 65 and
“Installing the system-board assembly” on
page 66.
1-2-2 DMA initialization failed. (Trained service technician only) Replace the
system-board assembly. See “Removing the
system-board assembly” on page 65 and
“Installing the system-board assembly” on
page 66.
1-2-3 DMA page register write/read failed. (Trained service technician only) Replace the
system-board assembly. See “Removing the
system-board assembly” on page 65 and
“Installing the system-board assembly” on
page 66.
70
BladeCenter HS12 Type 8014, 8028 or 1916: Problem Determination and Service Guide