IBM Aptiva 2161, Руководство пользователя

Страница: 106 / 222

(continued)
013 (continued)
(From step 008)
– Install the failing factory-installed adapter card in a different slot in the riser
card than where originally installed.
DOES THE FEATURE FUNCTION NORMALLY?
Yes No
014
Go to Step 016.
015
Replace the riser card.
016
(From step 014)
– Power-off the system unit.
– Check one adapter card at a time. To do this, install one adapter card in
the riser card and power-on the system unit.
– Repeat this with each adapter card if necessary.
IS A WINDOWS 95 DRIVER ERROR DISPLAYED FOR THE INSTALLED
ADAPTER CARD?
Yes No
017
Go to Step 019.
018
– Check for proper installation of the adapter card.
– Check all adapter card jumper positions.
– Check all cables and connectors on the adapter card for proper
installation.
– Check continuity of any cable attached to the adapter card and replace if
necessary.
– If the problem remains, replace the factory-installed adapter card.
– If the problem remains with a card that was not factory installed, consult
the service information provided by the card manufacturer.
019
(From step 017)
(Step 019 continues)
2-52
Machine Type 2161 - Service Level A Aptiva HMS