IBM 9306 001 Скачать руководство пользователя

Страница: 13 / 122

004 (continued)
If the problem still remains, replace the power
distribution unit.

005

Power-off the server rack and replace the server rack
components in the following order until the problem goes
away. See “Powering Off The Rack.”

1. Power distribution unit fuse.
2. Power distribution unit.

Powering Off The Rack

Before performing service on the rack, follow this
procedure to prevent personal injury and to avoid
damaging the rack and the installed servers.

To power-off the IBM PC Server/Netfinity Rack:

1. Shut down and power-off all installed servers.
2. Power-off the server selector unit.
3. If a UPS system is installed in the rack, power-off the

UPS system.

4. Disconnect power from the IBM PC Server/Netfinity

Rack.

If the rack is plugged into a wall-mounted power
supply, disconnect the power cord plug from the
wall socket.

If the power cord is wired directly into the
installed location's power supply, open the rear
door of the rack cabinet and disconnect the
power plug from the base of the power
distribution unit.

IBM PC Server/Netfinity Rack Enclosures

Содержание 9306 001



























































































































Результаты поиска

Содержание 9306 001

Отзывы:

Похожие инструкции для 9306 001

Бренды по названию

Популярные бренды

IBM 9306 001, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 9306 001

Отзывы:

Похожие инструкции для 9306 001

Бренды по названию

Популярные бренды