IBM 9006-22C, Установка и настройка

Страница: 104 / 148

See Figure 52 on page 90.
Figure 52. 9006-22P PCIe adapter positions
Position Step
1 (UIO Slot2), 2 (UIO Slot1) “3” on page 90
4 (WIO-R Slot) “4” on page 92
3 (WIO Slot1), 5 (WIO Slot2), 6 (WIO Slot3) “5” on page 94
3. To install a PCIe adapter in position 1 or 2, remove the PCIe riser as shown in Figure 53 on page 90.
Figure 53. Removing the PCIe riser
a) Retract the retaining pin (A) as shown in Figure 53 on page 90.
b) Lift the PCIe riser from the system.
c) Place the PCIe riser on an ESD surface.
d) Remove the screw and the tail-stock filler for that position.
e) If you are inserting a storage drive adapter, connect the signal cables to the adapter before
inserting the adapter.
90 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)