IBM 884015U, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 52 / 176

If the server has an optional RAID adapter and you have installed or removed a
hard disk drive, see the documentation that comes with the RAID adapter for
information about reconfiguring the disk arrays.
If the server has a RAID configuration using the SCSI controller with integrated
RAID and you have installed or removed a hard disk drive, you might have to
reconfigure the disk arrays. See the RAID documentation on the IBM ServeRAID-7e
(Adaptec HostRAID) Support CD for more information about reconfiguring the disk
arrays.
For information about configuring the integrated Gigabit Ethernet controllers, see
the User’s Guide .
Connecting external options
If you install a SCSI adapter or use the external SCSI connector, you can attach
external SCSI devices, such as a SCSI storage expansion enclosure, to the server.
You can attach additional external options to the other input/output (I/O) connectors
on the front and rear of the server. (See “Input/output connectors” on page 43 for
more information.)
Complete the following steps to attach an external device:
1. Read the “Installation guidelines” on page 11.and the safety information
beginning on page Appendix B, “Safety information,” on page 117. Also, read
the documentation that comes with the option.
2. Turn off the server and all attached devices (see “Turning off the server” on
page 7).
3. Follow the instructions that come with the option to prepare it for installation and
to connect it to the server.
Note: If you are attaching an external SCSI device, see “Ultra320 SCSI controller
system-board connectors” on page 44 for information about SCSI cabling and SCSI
IDs.
Power-cage card internal cable connectors
The following illustration shows the internal connectors on the power-cage card.
Fan 9
Fan 3
42
xSeries 346 Types 8840 and 1880: Hardware Maintenance Manual and Troubleshooting Guide