IBM 8669 - Eserver xSeries 342, Руководство по техническому обслуживанию аппаратной части

Страница: 91 / 156

AC distribution box
Note: Before beginning, read “Safety information” on page 109, “Before you begin”
on page 40 and “Handling static-sensitive devices” on page 41.
To remove the AC distribution box:
1. Turn off server and disconnect all external cables and power cords.
2. Remove the cover. See “Removing the cover and bezel” on page 42.
3. Remove screw
1
.
4. Pull the AC distribution box
1
toward front of machine in order to release it
from the chassis clips
3
.
5. Remove the two hot-swap power supplies.
6. Pull down on the cable receptacle
5
to release it from the chassis.
Note: To install the receptacle, push up into the chassis opening of slot
4
. Be
sure to properly replace receptacles, 1 to 1 and 2 to 2, as labeled.
System board
FRU information (service only)
81