IBM 8669 - Eserver xSeries 342, Руководство по техническому обслуживанию аппаратной части

Страница: 107 / 156

Error Code/Symptom FRU/Action
5962 (IDE CD-ROM configuration error)
1. Run Configuration/Setup
2. CD-ROM Drive
3. CD-ROM Power Cable
4. IDE Cable
5. System Board
6. Battery
8603 (Pointing Device Error)
1. Pointing Device
2. System Board
00019501 (Processor 1 is not functioning -
check VRM and processor LEDs)
1. VRM 1
2. Processor 1
3. System Board
00019502 (Processor 2 is not functioning -
check VRM and processor LEDs)
1. VRM 2
2. Processor 2
00019701 (Processor 1 failed)
1. Processor 1
2. System Board
00019702 (Processor 2 failed)
1. Processor 2
2. System Board
00180100 (A PCI adapter has requested
memory resources that are not available.)
1. Reorder the adapters in the PCI slots. It is important that your boot
device is positioned early in the scan order so that it is executed by
POST.
2. Ensure that the PCI adapter and all other adapters are set correctly
in the Configuration/Setup Utility program. If the memory resource
settings are not correct, change the settings.
3. If all memory resources are being used, you might need to remove
an adapter to make memory available to the PCI adapter. Disabling
the adapter BIOS on the adapter might correct the error. (Refer to
documentation provided with the adapter.)
00180200 (No more I/O space available
for PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180300 (No more memory (above 1MB
for PCI adapter))
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180400 (No more memory (below 1MB
for PCI adapter))
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
00180500 (PCI option ROM checksum
error)
1. Remove Failing PCI Card
2. System Board
00180600 (PCI to PCI bridge error)
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
Symptom-to-FRU index
97