IBM 8239 Token-Ring Stackable Hub, Руководство по установке и эксплуатации

Страница: 90 / 141

The add command positions you at the end of the script. When you press Enter, a
new line is automatically created. Press the Esc key to terminate the add
command. To create a script to disable the three ports, type:
>>script script1 add <Enter>
Enter commands . . .
<
ESC> to quit
[ 1] disable port 1.3
<
Enter>
[ 2] disable port 1.5 <Enter>
[ 3] disable port 1.10 <Enter>
[ 4] <Esc>
To look at the script, type:
>>script script1 list <Enter>
Script: script1
[ 1]
disable port 1.3
[ 2] disable port 1.5
[ 2] disable port 1.10
>>
Editing Scripts
Continuing the example from “Adding Commands” on page 7-5, assume you need
to disable port 6 instead of port 5.
Because you will access lines within the script by line number, you should list the
script before you modify it.
>>script script1 list <Enter>
The script interface responds:
Script: script1
[ 1]
disable port 1.3
[ 2] disable port 1.5
[ 3] disable port 1.10
>>
To look at your choice of command options, type:
>>script script1 <Enter>
Accepted inputs:
1) add 6) insert
2) clear 7) list
3) copy_to 8) name
4) delete 9) replace
5) edit 10) run
>>script script1
To replace line 2 to reflect hub 6 rather than hub 5, type:
>>script script1 _edit 2 <Enter>
[ 2] disable port 1.5
Change the 5 to a 6.
To verify the change, type:
7-6
8239 Setup and User’s Guide