IBM 8239 Token-Ring Stackable Hub, Руководство по установке и эксплуатации

Страница: 89 / 141

>>3 <Enter>
The script interface replaces the number you typed with the name currently
assigned to the third script and positions you at the end of the command:
>>script -NoName-3
For a list of possible inputs, type ? and press Enter.
Accepted inputs:
1) add 6) insert
2) clear 7) list
3) copy_to 8) name
4) delete 9) replace
5) edit 10) run
>>script -NoName-3
To name the script, type:
>>script -NoName-3 _name <Enter>
The script interface responds:
Enter Script Name (Max 15 characters):
>> script _NoName-3 name
Enter the name of the script:
>> script _NoName-3 name_script1 <Enter>
To display the script name, type:
>>display scripts <Enter>
1) -NoName-1 6) -NoName-6
2) -NoName-2 7) -NoName-7
3) script1 8) -NoName-8
4) -NoName-4 9) -NoName-9
5) -NoName-5 10) -NoName-10
Adding Commands
It is recommended that you first manually execute commands that you are going to
put in a script to verify that the syntax is correct. Assume you are at hub 1 and
that you wish to use a script to disable ports 3, 5, and 10. To disable port 3, type
>>disable port 1.3 <Enter>
To check the command, type:
>>display port 1.3 <Enter>
8228 Speed Counters
Port Mode Status Mode Traps Detect Spd Bcn
---- ------ ---------- ------- ------- ------ --- ---
1.3 Disabled No Phantom Disabled Disabled Enabled 0 0
Before adding commands to the script, verify that the script is empty:
>>script script1 list <Enter>
Script: script1
[Empty]
>>
Chapter 7. 8239 Device Management
7-5