IBM 8239 Token-Ring Stackable Hub, Руководство по установке и эксплуатации

Страница: 31 / 141

Figure 2-1. Rotating the Rack-Mounting Brackets
1. Using a Phillips screwdriver, remove the four screws, two on each side, that
attach the mounting brackets to the sides of the 8239, as shown in Figure 2-1.
2. Rotate the brackets and reattach them.
3. Refer to your network documentation to determine where in the rack to mount
the 8239.
4. Gather the rack-mounting screws (not provided) and place them within reach.
5. Hold the 8239 in position in the rack and start the lower of the two screws that
will secure the left bracket.
6. On the right side, align the lower screw holes in the mounting bracket and the
cable management bracket with the correct hole of the rack; then start the
screw as shown in Figure 2-2 on page 2-4.
Chapter 2. Installing the 8239 Hardware
2-3