IBM 79788BU, Руководство пользователя

Страница: 66 / 102

loading and execution of ROM code per PCI slot (see message 1801 in the
Problem Determination and Service Guide on the IBM Documentation CD).
– PCI Slot/Device Information
This choice is available only if an optional Remote Supervisor Adapter II
SlimLine is installed. The Remote Supervisor Adapter II Slimline is considered
to be in PCI slot 0, which is the system board.
Select this choice to view the PCI device information, including PCI bus
number, for each PCI slot. Highlight a slot; then, press Enter to view the
details of the PCI devices that are connected to the slot. Follow the
instructions on the screen to page forward or backward through the devices
that are connected to the slot.
– RSA II Settings
This choice is available only if an optional Remote Supervisor Adapter II
SlimLine is installed.
Select this choice to configure the settings for the Remote Supervisor Adapter
II SlimLine.
- MAC Address
This is a nonselectable item that displays the MAC address of the Remote
Supervisor Adapter II SlimLine.
- DHCP IP Address
This is a nonselectable item that displays the current IP address of the
Remote Supervisor Adapter II SlimLine.
- DHCP Control
Specify whether to use the static IP address or use DHCP to dynamically
assign the IP address for the Remote Supervisor Adapter II SlimLine. If
DHCP times out while it is assigning an IP address, the system defaults to
the static IP address.
- Static IP Settings
Define the static IP address, subnet mask, and gateway address for the
Remote Supervisor Adapter II SlimLine.
- OS USB selection
Select the operating system to use to provide USB support for remote
access to the Remote Supervisor Adapter II SlimLine. The remote keyboard
and mouse access the Remote Supervisor Adapter II SlimLine through a
USB port. Linux OS is the default setting.
- Periodic SMI Generation
Enable or disable the periodic generation of a systems-management
interrupt. Disabled is the default setting.
– Baseboard Management Controller (BMC) setting
Select this choice to change settings for the BMC.
- BMC Firmware Version
This is a nonselectable menu item that displays the BMC firmware version.
- BMC Build Level
This is a nonselectable menu item that displays the BMC firmware build
level.
- BMC Build Date
This is a nonselectable menu item that displays the BMC firmware build
date.
- BMC POST Watchdog
Enable or disable the BMC POST watchdog. Disable is the default setting.
52
IBM System x3550 Type 7978: User’s Guide