IBM 79788BU, Руководство пользователя

Страница: 58 / 102

AIR
FLO
W
AIRFLO
W
AIRFLO
W
Grommets
Mounting slots
Wiring channel
4. Place the fan down onto the fan assembly bracket until the four blue grommets
are correctly seated in the mounting slots.
5. Route the fan connection cable through the wiring channel.
6. Connect the fan cable by inserting the cable connector firmly into the orange fan
connector on the system board until it snaps into place.
Note: Make sure that the grommets and the fan cable are securely seated so
that the fan doors close correctly.
7. Close both fan doors and slide the server into the rack.
If you have other options to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 45.
Installing a Remote Supervisor Adapter II SlimLine
An optional Remote Supervisor Adapter II SlimLine can be installed only in a
dedicated connector on the system board. After the Remote Supervisor Adapter II
SlimLine is installed, the systems-management Ethernet port on the rear of the
server is active.
To install a Remote Supervisor Adapter II SlimLine, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 23.
2. Turn off the server and peripheral devices and disconnect the power cords and
all external cables, if necessary. Remove the server cover.
3. Remove the riser-card assembly in slot 2 and put it in a safe place. See
“Replacing a riser-card assembly” on page 33 for more information.
4. Put the protective plastic cover on the Remote Supervisor Adapter II SlimLine.
5. Turn the Remote Supervisor Adapter II SlimLine so that the keys on the
connector align correctly with the connector on the system board.
44
IBM System x3550 Type 7978: User’s Guide