IBM 7944, Инструкция по установке и эксплуатации

Страница: 67 / 150

Table 13. Memory online-spare mode DIMM population sequence
Installed
Microprocessor
DIMM connector
Microprocessor 1 3, 6, 9
3, 6, 9, 2, 5, 8
3, 6, 9, 2, 5, 8, 1, 4, 7
Microprocessor 2 12, 15, 18,
12, 15, 18, 11, 14, 17,
12, 15, 18, 11, 14, 17, 10, 13, 16
Installing a DIMM
Use this information to install a DIMM.
To install a DIMM, complete the following steps:
Step 1. Read the safety information that begins on “Safety” on page iii and “Installation guidelines” on page
41 .
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the cover (see “Removing the cover” on page 48 ).
Step 4. Open the retaining clip on each end of the DIMM connector.
Attention:
To avoid breaking the retaining clips or damaging the DIMM connectors, open and
close the clips gently.
Figure 32. DIMM installation
Step 5. Touch the static-protective package that contains the DIMM to any unpainted metal surface on the
outside of the server. Then, remove the DIMM from the package.
Step 6. Turn the DIMM so that the DIMM keys align correctly with the connector.
Chapter 2
.
Installing optional devices
57