2.0 Chapter 2. Setting Up the 7208 Tape Drive
This topic provides step-by-step instructions on how to properly install the 7208 Tape Drive Model 341.
DANGER
+--------------------------------------------------------+
PICTURE 4 ¦ To prevent a possible electrical shock when adding or ¦
¦ removing any devices to or from the system, ensure ¦
¦ that the power cords for those devices are unplugged ¦
¦ before the signal cables are connected or ¦
¦ disconnected. If possible, disconnect all power cords ¦
¦ from the existing system before you add or remove a ¦
¦ device. (72XXD203) ¦
+--------------------------------------------------------+
Before installing the 7208 Tape Drive, let it acclimate to the operating
environment for as long as it has been away from the environment or for 24
hours, whichever is less.
Attention: The 7208 Tape Drive is a precision device that requires reasonable care in handling to prevent data loss or permanent
damage. Avoid bumping or dropping the 7208 Tape Drive.
To unpack the 7208 Tape Drive, simply remove the packing material from the box it was shipped in.
Subtopics
2.1 Performing the Installation
7208 Model 341 Setup and Operator Guide
Chapter 2. Setting Up the 7208 Tape Drive
¦ Copyright IBM Corp. 1997
2.0 - 1