IBM 7208-341 Скачать руководство пользователя страница 31

Страница: 31 / 66

2.1.10 Step 10. Performing the 7208 Tape Drive Checkout Procedure

To perform the checkout procedure, do the following:

__ 1. Configure the 7208 Tape Drive to the RS/6000 software by doing the following:

a. Log into the RS/6000 (AIX operating system).

Note: You must have root authority to install or remove the 7208 Tape Drive from the system. To obtain root authority, see your

system administrator.

b. At the system prompt, type lsdev -Cs scsi and press Enter. The command lists all of the SCSI devices that are connected to the

RS/6000. Figure 7 shows an example of the screen that displays. The screen lists:

1 Device name

2 Device status

3 SCSI adapter slot number

4 Description of the SCSI device

5 SCSI address (begins with 7th digit)

+------------------------------------------------------------------------+

¦ ¦

¦ PICTURE 11 ¦

¦ ¦

+------------------------------------------------------------------------+

Figure 7. Screen Display of SCSI Devices Attached to the RS/6000

c. From the list of SCSI devices, identify the 7208 Tape Drive (listed as the Differential SCSI 8mm Tape Drive):

If the status of the 7208 Tape Drive is displayed as Available, the device has successfully been configured.

If the status is not displayed as Available, refer to Topic 2, "Maintenance Analysis Procedures," in the 7208 20GB External

8mm Tape Drive Model 341 Service Guide. For more information about configuring the 7208 Tape Drive to the system

software, refer to your AIX or RS/6000 manuals.

d. This completes the 7208 Tape Drive installation.

Store the test cartridge and the cleaning cartridge for future use. Store all 7208 Tape Drive publications with your system manuals.

7208 Model 341 Setup and Operator Guide

Step 10. Performing the 7208 Tape Drive Checkout Procedure

¦ Copyright IBM Corp. 1997

2.1.10 - 1

Содержание 7208-341



































































Результаты поиска

Содержание 7208-341

Отзывы:

Похожие инструкции для 7208-341

Бренды по названию

Популярные бренды

IBM 7208-341, Руководство по настройке и эксплуатации

Результаты поиска

Содержание 7208-341

Отзывы:

Похожие инструкции для 7208-341

Бренды по названию

Популярные бренды