IBM 7208-341 Скачать руководство пользователя страница 48

Страница: 48 / 66

4.1 Removal Checklist

When moving the 7208 Tape Drive, perform the following steps:

Attention: Failure to perform the following steps in sequence before you add or delete a device may result in data loss or a system fault.

__ 1. If loaded, remove the tape cartridge from the drive by pressing the unload button while the 7208 Tape Drive power is on.

__ 2. Remove the 7208 Tape Drive from the system configuration (for instructions, refer to your system manuals).

Attention: Failure to inform the operating system before you add or delete a device may result in data loss or a system fault.

__ 3. If it is on, do a controlled shutdown of the system unit. Refer to "Step 6. Performing a System Shutdown" in topic 2.1.6.

__ 4. Turn off the power to the 7208 Tape Drive.

__ 5. Turn off the power to all external devices attached to the system.

__ 6. Turn off the power to the system unit.

__ 7. Unplug the power cable for the 7208 Tape Drive from the electrical outlet.

__ 8. Unplug the system unit power cable from the electrical outlet.

Attention: When SCSI bus cables are connected to a system unit, they must also be connected to a device. Do not leave the SCSI bus

cable connected to the system if the device for that cable has been removed.

__ 9. Disconnect the SCSI bus cable from the system unit.

__ 10. Disconnect the SCSI bus cable from the 7208 Tape Drive.

__ 11. Ensure that the terminator is on the last device on the SCSI bus (see "Step 8. Installing the SCSI Terminator" in topic 2.1.8).

__ 12. Remove the 7208 Tape Drive and place it in the new location.

__ 13. Reinstall the 7208 Tape Drive (refer to Chapter 2, "Setting Up the 7208 Tape Drive" in topic 2.0).

7208 Model 341 Setup and Operator Guide

Removal Checklist

¦ Copyright IBM Corp. 1997

4.1 - 1

Содержание 7208-341



































































Результаты поиска

Содержание 7208-341

Отзывы:

Похожие инструкции для 7208-341

Бренды по названию

Популярные бренды

IBM 7208-341, Руководство по настройке и эксплуатации

Результаты поиска

Содержание 7208-341

Отзывы:

Похожие инструкции для 7208-341

Бренды по названию

Популярные бренды