5.2.1.1 Setting the Address for a Manual-Plug Disk Drive
Attention: Follow all ESD-sensitive parts procedures while performing these instructions. For ESD information, see "Handling
Electrostatic Discharge-Sensitive Parts" in topic 5.1.
Set the address for a 4.5GB, 2.2GB, or 1.1GB hard disk drive (Figure 5-3)
Note: If the 4.5GB hard disk drive is installed with any other media bay feature, we recommend that for better cooling, you install the
4.5GB hard disk drive in the lower of the media bays (address 5).
7131-105 User's Guide
Setting the Address for a Manual-Plug Disk Drive
¦ Copyright IBM Corp. 1995, 1996
5.2.1.1 - 1
