IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, Руководство пользователя

Страница: 98 / 326

Chapter 4
Windows Host Configuration
98
5. At the “Browse for Printer” dialog box that displays, double click
the appropriate workgroup containing the Ethernet Interface.
By default, the print server falls under the workgroup,
“WORKGROUP.”
6. Continue searching the network until you see the Ethernet
Interface name, “M_xxxxxx”, where “xxxxxx” equals the last six
digits of the print server Ethernet address found when a
configuration is printed.
7. Once you see the Ethernet Interface, double click it to display a
list of predefined destinations/queues from which to choose.
8. Select a destination/queue that will use
d1prn
.
9. Click OK once you have selected a destination.
10. Back at the network path window, select NEXT since this path
should now be filled in for you.
11. At the next window, select the appropriate print driver and click
NEXT.
12. Fill in a name for this new network printer at the next window
and decide if you want this to be the default printer. This printer
name can be anything you would like as long as it is unique.
13. When prompted for a test page, select either “Yes” or “No”
depending on the state of the attached printer, and click
FINISH.
NOTE: Windows may ask for a disk or CD-ROM to load the
appropriate printer driver to complete this new printer
setup.
There should now be a new printer icon within the “Printers” folder.
This new network printer relies on NetBIOS over TCP/IP as the
underlying protocol to print to the Ethernet Interface.