IBM 4400-006 - 4400 Model 006 B/W Direct Thermal Скачать руководство пользователя страница 219

Страница: 219 / 326

Configuring PSF/400 for IPDS On V4R2 And Above

219

Verifying The IPDS Configuration On AS/400

SMART

To test IPDS printing:

If it is not already on, vary on the line description:

VRYCFG CFGTYPE(*LIN)

To start TCP/IP, enter

STRTCP

Verify that the AS/400 TCP/IP interface is active. Use the
command:

WRKTCPSTS

and then select option 1.

Turn the printer on and wait until the printer control panel
displays “E-NET READY.”

To verify the printer is connected to AS/400,

ping

the printer

from an AS/400 workstation with one of the following
commands:

PING ip_address

PING hostname

where

ip_address

is the Internet address of the remote

system printer (the Ethernet Interface), and

hostname

is the

hostname you defined for the printer, if any.

•

If the

ping

is not successful, refer to “Cannot PING The

Printer” on page 222.

•

If the

ping

is successful, vary on the printer device

description with the command:

VRYCFG (printer_device) CFGTYPE(*DEV)

STATUS(*ON)

To use PSF/400 to send an IPDS file to the printer, enter:

STRPRTWTR DEV (printer_device)

where

printer_device

is the name of the printer.

Содержание 4400-006 - 4400 Model 006 B/W Direct Thermal







































































































































































































































































































































Результаты поиска

Содержание 4400-006 - 4400 Model 006 B/W Direct Thermal

Отзывы:

Похожие инструкции для 4400-006 - 4400 Model 006 B/W Direct Thermal

Бренды по названию

Популярные бренды

IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, Руководство пользователя

Результаты поиска

Содержание 4400-006 - 4400 Model 006 B/W Direct Thermal

Отзывы:

Похожие инструкции для 4400-006 - 4400 Model 006 B/W Direct Thermal

Бренды по названию

Популярные бренды