© Copyright IBM Corporation 2020, 2021 Customer Install Guide, 100G Switch
10
•
Each rack cabinet might have more than one power cord.
o
For AC powered racks, be sure to disconnect all power cords in the rack
cabinet when directed to disconnect power during servicing.
o
For racks with a DC power distribution panel (PDP), turn off the circuit
breaker that controls the power to the system unit(s), or disconnect the
customer’s DC power source, when directed to disconnect power during
servicing.
•
Connect all devices installed in a rack cabinet to power devices installed in the
same rack cabinet. Do not plug a power cord from a device installed in one rack
cabinet into a power device installed in a different rack cabinet.
•
An electrical outlet that is not correctly wired could place hazardous voltage on
the metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock. (R001 part 1)
R007
CAUTION:
Use safe practices when lifting.
L001
