IBM 2073-700, Быстрое руководство по установке

Страница: 57 / 82

Table 10. This table (optional) is useful for completing the Easy Setup wizard. The table entries serve as a guide
only. Enter the Value column with your system information. (continued)
Field Value Notes
DNS servers Numerical address of user Domain Name Server (for
example, 9.11.22.xxx) can be multiple server addresses
DNS search domain Additional domain names to be used with primary
domain name (for example, a.customer.com or
us.customer.com)
Search string This is a list of one or more domain names used when
trying to resolve a short name (for example:
company.com, storage.company.com,
servers.company.com).
This field is not required and may be left blank. If it is
left blank then no search string is set for the cluster.
Public IP addresses The public IP addresses are the data path connections
to the customer network. They are used for all of the
Ethernet data path connections the file modules. At
least 2 addresses are recommended (1 per node). The
data path connections use Ethernet bonding, so a
single IP address (along with a subnet mask and
gateway) is used for all available Ethernet ports on a
singlefile module. The system automatically load
balances between the physical ports on a single file
module.
Subnet Where subnet is the numeric IP address of the public
network (data path). It is used for all of the Ethernet
data path connections.
Subnet mask This is the subnet mask associated with the previous IP
address.
CIDR equivalent of
the subnet mask This is the CIDR (/XX) equivalent of the subnet mask
that was specified previously. Look up the subnet mask
(specified previously) then refer to the Table 12 on page
49 and find the CIDR equivalent and record it on this
line. It must be between /0 and /32.
Default gateway This is the numeric gateway of the data path
connection to the customer network. It is used for all
of the Ethernet data path connections on a single file
module.
Additional gateways Additional gateways are the data path connection to
the customer network. It is used for all of the Ethernet
data path connections on a single 2851-SI1 file module
Chapter 3. Configuring the system
47