IBM 2073-700 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 82

background image

Notices

This information was developed for products and services offered in the U.S.A.

IBM may not offer the products, services, or features discussed in this document in
other countries. Consult your local IBM representative for information on the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may
be used instead. However, it is the user's responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:

IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact the IBM
Intellectual Property Department in your country or send inquiries, in writing, to:

Intellectual Property Licensing
Legal and Intellectual Property Law
IBM Japan, Ltd.
1623-14, Shimotsuruma, Yamato-shi
Kanagawa 242-8502 Japan

The following paragraph does not apply to the United Kingdom or any other
country where such provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions, therefore, this statement may not apply
to you.

This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.

Any references in this information to non-IBM websites are provided for
convenience only and do not in any manner serve as an endorsement of those
websites. The materials at those websites are not part of the materials for this IBM
product and use of those websites is at your own risk.

© Copyright IBM Corp. 2011

63

«
...
71
72
73
74
75
...
»

Содержание 2073-700



















































































Отзывы:

Нет отзывов

Похожие инструкции для 2073-700

Бренд: D-Link Страницы: 7

Бренд: D-Link Страницы: 41

Бренд: Icidu Страницы: 10

Бренд: Yamaha Страницы: 3

Бренд: Konig Страницы: 73

Бренд: Juniper Страницы: 825

iDataPlex dx320 6385

Бренд: IBM Страницы: 60

Бренд: Zalip Страницы: 77

Бренд: UTStarcom Страницы: 71

Бренд: iDirect Страницы: 72

H-Post Shelving

Бренд: Hallowell Страницы: 7

AlterPath Manager 2500

Бренд: Cyclades Страницы: 368

Бренд: TRENDnet Страницы: 2

Бренд: TRENDnet Страницы: 2

Бренд: IBM Страницы: 104

IDS-5042 Series

Бренд: ORiNG Страницы: 67

Бренд: D-Link Страницы: 12

Бренд: Emerson Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды