C-24 EtherJet CardBus Ready Port Adapter with Modem
April 20, 1999 10:20 am
Telecommunication Notices
Federal Communications
Commission (FCC) and Telephone
Company Requirements
1) This adapter complies with Part 68 of the FCC rules. A label is
affixed to the adapter that contains, among other things, the
FCC registration number and Ringer Equivalency Number
(REN) for this equipment. If these numbers are requested,
provide this information to your telephone company.
2) The REN is useful to determine the quantity of devices you
may connect to your telephone line and still have those
devices ring when your number is called. In most, but not all
areas, the sum of the RENs of all devices should not exceed
five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should
call your local telephone company to determine the maximum
REN for your calling area.
3) If the adapter causes harm to the telephone network, the
telephone company may discontinue your service temporarily.
If possible, they will notify you in advance; if advance notice is
not practical, you will be notified as soon as possible. You will
be advised of your right to file a complaint with the FCC.
4) Your telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the
proper operation of your equipment. If they do, you will be
given advance notice to give you an opportunity to maintain
uninterrupted service.
5) If you experience trouble with this product, contact your
Authorized Reseller, or call IBM. In the United States, call IBM
at 1 800 772-2227. In Canada, call IBM at 1 800 565-3344. You
may be required to present proof of purchase. The telephone
company may ask you to disconnect the adapter from the
network until the problem has been corrected, or until you are
sure the adapter is not malfunctioning.
fhf0mstr.book Page 24 Tuesday, April 20, 1999 10:39 AM