background image

© Copyright IBM Corp. 1999

2-1

 

April 20, 1999 10:38 am

Chapter 2.  Windows 95 and
Windows 98 Installation

Plug and Play Installation

Plug and play installation of the EtherJet CardBus Ready Port 
Adapter with Modem is supported under Windows 98 and 
Windows 95 Version 950b (OSR2) and later. Installation with 
these versions of Windows is described in this chapter. 

Note:

Windows 95 Version 950/950a are not supported with the 
EtherJet CardBus Ready Port Adapter with Modem due 
to limitations for CardBus multifunction (LAN and 
Modem) devices.

Drivers Available

The following drivers for Windows 95 and 98 are supplied with 
the EtherJet CardBus Ready Port Adapter with Modem: 

NDIS3 driver (IBMC.SYS) 

NDIS4 driver (IBMCN4.SYS) 

32-bit ODI driver (IBMC.LAN) with promiscuous support

The NDIS3 driver IBMC.SYS is installed by default when you use 
the procedures in this chapter. For NDIS4 instructions, see the 
README file on the IBM CD-ROM. 

32-bit ODI Driver

If your environment requires use of the 32-bit ODI client driver 
under Windows 95 (as indicated by your network administrator), 
see the Windows Help file HELPDOCS.HLP on the IBM CD-ROM 
for instructions.

fhf0mstr.book  Page 1  Tuesday, April 20, 1999  10:39 AM

Содержание 10/100 EtherJet CardBus Ready Port Adapter with 56K Modem

























































































Отзывы: